Yantai Dongruitai Welding and Cutting Equipment Co., Ltd. is one of the leading manufacturers and suppliers of sheet metal laser cutting machine in China. We are committed to providing high quality customized machines with low price. Welcome to wholesale the newest sheet metal laser cutting machine made in China here from our factory. 1 years warranty is available.

Manufactured by Dongruitai Laser, the sheet metal laser cutting machine is engineered to satisfy the rigorous demands of global metal fabricators and OEM production facilities. The system combines a stress-relieved welded machine bed, dual-drive rack-and-pinion kinematics, and imported Japanese servo technology to deliver reliable motion accuracy and high processing dynamics. All machine configurations comply with European CE safety standards for industrial machinery.

Technical Features

Welded Machine Bed with Thermal Stress Relief

Technical Issue: Continuous high-power laser operation and high-dynamic axis motion subject the machine frame to cyclic thermal and mechanical stresses, which can cause structural distortion over long operating cycles.
Our Solution: The machine frame is fabricated from heavy-gauge steel plates and structural tubing. Following welding, the entire structure undergoes a 600°C furnace annealing heat treatment combined with vibration stress relief (VSR) to reduce residual mechanical stress in the weldments.
Function: Residual stress reduction prevents long-term frame warping, maintaining structural alignment and linear guide parallelism under continuous industrial operation.

Drive Kinematics & Dynamic Response

Challenge: Non-cutting motion, rapid traverse between profiles, and frequent direction changes on tight contours account for significant idle time in sheet metal processing.
Our Solution: The motion system utilizes Japanese high-torque servo motors paired with precision helical rack-and-pinion dual drives on the main axes.
Function: The drive system supports a maximum acceleration of 4G and a maximum rapid traverse speed of 100 m/min. Higher acceleration reduces cornering deceleration overhead and positioning time between cuts, improving cycle times particularly on thin-gauge components with high contour density.

Precision Axis Positioning and Repeatability

Technical Issue: Downstream assembly, automated bending, and robotic welding require consistent part edge accuracy and tight dimensional tolerances.
Engineering Solution: Axis motion is guided by precision linear rails and calibrated during assembly using optical alignment equipment and laser interferometers.
Function: The sheet metal fiber laser cutting machine maintains an X/Y axis positioning accuracy of ±0.02 mm and a repeatability accuracy of ±0.02 mm, minimizing kerf variation and dimensional scrap across batch production runs.

Multiple fiber laser sources are available

Technical Issue: Unplanned component failure or high electrical consumption increases total cost of ownership.
Solution: Dongruitai Laser integrates solid-state fiber laser sources with power ratings ranging from 1.5 kW (1500 W) to 60 kW (60,000 W).
Impact: Fiber laser diodes offer an expected operational lifespan of up to 100,000 hours under standard operating conditions. High electro-optical conversion efficiency lowers power consumption compared to traditional CO2 systems and supports compressed-air assist gas cutting options.

Technical Specifications

Parameter	Configuration	Value
Max Operating Speed	100 m/min	Reduces air-pass traverse time between cuts.
Max Acceleration	4G	Improves dynamic response during tight contouring.
X/Y Positioning Accuracy	±0.02 mm	Ensures precise edge tolerances for downstream fitting.
X/Y Repeatability Accuracy	±0.02 mm	Maintains part-to-part consistency in mass production.
Transmission Type	Dual-drive rack and pinion	High-torque power transmission with minimal backlash.
Drive System	Imported Japanese servo motors	Closed-loop feedback with high dynamic response.
Frame Construction	Plate/tube welded + 600°C annealing	Relieves internal welding stress to prevent frame distortion.
Laser Power Range	1.5 kW - 60 kW	Configurable for thin-gauge sheet up to heavy plate.
Laser Source Lifespan	Up to 100,000 hours	Extended diode service intervals.
Operating Environment	380V/50Hz, -20°C to 45°C, ≤80% RH	Rated for standard industrial plant conditions.

Machine Dimensions

To fit different plant layouts and production scales, Dongruitai Laser offers multiple machine bed dimensions. Custom working formats are available upon request.

Model	Cutting Range (L × W)	Laser Rate Options
DRT-3015	3000 mm × 1500 mm (10 ft × 5 ft)	1500W / 3000W / 6000W / 12000W / 20000W / 30000W / 40000W / 60000W
DRT-4020	4000 mm × 2000 mm (13 ft × 6.5 ft)
DRT-6025	6000 mm × 2500 mm (20 ft × 8 ft)
DRT-13031	13000 mm × 3100 mm (42 ft × 10 ft)

Applications

The fiber sheet cutting machine processes a comprehensive spectrum of ferrous and non-ferrous conductive metals:

Supported Materials:

Carbon Steel, Stainless Steel, Galvanized Sheet, Color Steel Plate, Electrolytic Plate, Aluminum Plate, Aluminum Alloy, Brass, Red/Purple Copper, Manganese Steel, Titanium Alloy, etc.

Target Industries:

Electrical Power & Distribution Cabinets, Automotive Manufacturing, Mechanical Equipment, Hotel Kitchenware, Elevator Enclosures, Advertising Signs, Automotive Parts, Precision Medical Devices, Chassis & Sheet Cabinets, Agricultural & Animal Husbandry Machinery.

Hot Tags: sheet metal laser cutting machine, China sheet metal laser cutting machine manufacturers, suppliers, factory